1)	BidCos
2)	Thermostatic Controls
3)	FHT protocol
4)	FS20
5)	FHZ1000PC
6)	What is FHZ 1000 PC
7)	FS20 Protocol
8)	Driver installation MacOSX
9)	EnOcean
10)	HMS Protocol

Forum: FHZ 1000

Forums->FHZ 1000->Problem with kernel 2.6.18.2

[prev topic | next topic]

MBeuker

Problem with kernel 2.6.18.2

Hi,
Unfortunately I'm a bit new in Linux.
But I do not get the thing to work. I tried to use Solution C
My kernel messages says:
Mar 12 23:02:51 kernel: usb 1-2: new full speed USB device using uhci_hcd and address 6
Mar 12 23:02:51 kernel: usb 1-2: new device found, idVendor=0403, idProduct=f06f
Mar 12 23:02:51 kernel: usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=3
Mar 12 23:02:51 kernel: usb 1-2: Product: ELV FHZ 1000 PC
Mar 12 23:02:51 kernel: usb 1-2: Manufacturer: ELV AG
Mar 12 23:02:51 kernel: usb 1-2: SerialNumber: XXXXXXXX
Mar 12 23:02:51 kernel: usb 1-2: configuration #1 chosen from 1 choice
Mar 12 23:02:51 kernel: ftdi_sio 1-2:1.0: FTDI USB Serial Device converter detected
Mar 12 23:02:51 kernel: drivers/usb/serial/ftdi_sio.c: Detected FT8U232AM
Mar 12 23:02:51 kernel: usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB0

It seems a bit different from the described procedure. But is it wrong?
How can I correct this?

on: Mon 12 of Mar, 2007 [21:28 UTC]

score: 0.00